Home » HP Manuals » Storage Devices » HP StorageWorks 2/140 » Manual Viewer

HP StorageWorks 2/140 director 2/140 rack mount kit installation instructions - Page 11

Installation Instructions, Rack Mount Kit Checklist, Mounting Hardware - storageworks 20

View all HP StorageWorks 2/140 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Installation Instructions This section describes the procedures used for installing a StorageWorks Director 2/140 in an appropriate HP, or comparable, 19-inch Electronic Industries Association (EIA) rack: • HP 9000 series, 10000 series and 11000 series racks • HP rack system/e or 19-inch EIA rack Rack Mount Kit Checklist This section describes the contents of the rack mount kit as well as tools or equipment required to complete the installation. Mounting Hardware • Twenty-six (26) Phillips panhead screws (10-32 x 1/2) with split lock and flat washers (only 20 required) • Twelve (12) Phillips flathead countersunk screws (10-32 x 3/8). • Twelve (12) cage nuts • Eight (8) self-tapping sheet metal screws (10-32 x 1/2). director 2/140 rack mount kit installation instructions 1

Section	Page
Contents	3
About this Guide	5
Intended Audience	5
Related Documentation	5
Document Conventions	6
Table 1: Document Conventions	6
Symbols in Text	6
Symbols on Equipment	7
Rack Stability	8
Getting Help	8
HP Technical Support	8
HP Website	9
HP Authorized Reseller	9
Installation Instructions	11
Rack Mount Kit Checklist	11
Mounting Hardware	11
Brackets	12
Figure 1: Brackets included in kit	12
Required Items	13
Rack Mounting Guidelines	13
Tips for Installing More than One Switch	13
Moving the Director 2/140	14
Installing the Shelf Brackets in the Rack	14
Installing the Shelf Brackets in HP 9000, 10000 and 11000 Series Racks	14
Figure 2: Angle brackets mounted on vertical cabinet rails in HP 9000, 10000 and 11000 series rack	15
Figure 3: Shelf brackets mounted in HP 9000, 10000 and 11000 series rack	16
Installing Shelf Brackets in an HP Rack System/e or 19-inch EIA Rack	17
Attaching the Mounting Hardware to the Director 2/140	18
Figure 4: .Securing the front mounting brackets to the Director 2/140	18
Inserting Cage Nuts in the Rack	19
Inserting the Front Cage Nuts in the Rack	19
Inserting the Rear Cage Nuts in the Rack	19
Finalizing the Rack Mounting Procedure	19
Installing the Director 2/140 in the Rack	20
Securing the Front Mounting Brackets to the Rack	20
Securing the Rear Mounting Brackets to the Rack	20
Connecting the Director 2/140 to a Power Source	21
Figure 5: AC power connections	21
Power-On Self Test	22