HP StorageWorks 2/140 director 2/140 rack mount kit installation instructions - Page 15
Angle brackets mounted on vertical cabinet rails in HP 9000, 10000 and 11000 series rack
 |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions 3. Use a straight edge to locate the corresponding rack hole along the interior vertical rails of the rack cabinet. Mark this location on each interior vertical rail. 4. Position a small angle bracket along the interior vertical rail as shown in Figure 2. Align the angle bracket so that the two threaded holes on the small tab align with the 1U location marked in step 3. 5. Secure the angle bracket to the rail using two self-tapping sheet metal screws. 6. Repeat step 2 through step 5 to mount a small angle bracket on each interior vertical rail of the cabinet. Figure 2: Angle brackets mounted on vertical cabinet rails in HP 9000, 10000 and 11000 series rack director 2/140 rack mount kit installation instructions 5
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
 |
 |
Installation Instructions
5
director 2/140 rack mount kit installation instructions
3.
Use a straight edge to locate the corresponding rack hole along the interior vertical
rails of the rack cabinet. Mark this location on each interior vertical rail.
4.
Position a small angle bracket along the interior vertical rail as shown in Figure 2.
Align the angle bracket so that the two threaded holes on the small tab align with
the 1U location marked in
step 3
.
5.
Secure the angle bracket to the rail using two self-tapping sheet metal screws.
6.
Repeat
step 2
through
step 5
to mount a small angle bracket on each interior
vertical rail of the cabinet.
Figure 2:
Angle brackets mounted on vertical cabinet rails in HP 9000, 10000
and 11000 series rack