Home » HP Manuals » Storage Devices » HP StorageWorks 2/140 » Manual Viewer

HP StorageWorks 2/140 director 2/140 rack mount kit installation instructions - Page 18

Attaching the Mounting Hardware to the Director 2/140

View all HP StorageWorks 2/140 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Installation Instructions Attaching the Mounting Hardware to the Director 2/140 Use these steps to secure the mounting hardware to the Director 2/140. NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead countersunk Phillips screws. 1. Locate the two front mounting brackets in the shipping carton. 2. Secure the front mounting brackets on either side of the Director, as shown in Figure 4. For each front mounting bracket, use three screws. Figure 4: .Securing the front mounting brackets to the Director 2/140 3. Locate the two rear mounting plates in the shipping carton. 4. Secure the two rear mounting plates to each side of the Director, as shown in Figure 4. For each plate, use three screws. 8 director 2/140 rack mount kit installation instructions

Section	Page
Contents	3
About this Guide	5
Intended Audience	5
Related Documentation	5
Document Conventions	6
Table 1: Document Conventions	6
Symbols in Text	6
Symbols on Equipment	7
Rack Stability	8
Getting Help	8
HP Technical Support	8
HP Website	9
HP Authorized Reseller	9
Installation Instructions	11
Rack Mount Kit Checklist	11
Mounting Hardware	11
Brackets	12
Figure 1: Brackets included in kit	12
Required Items	13
Rack Mounting Guidelines	13
Tips for Installing More than One Switch	13
Moving the Director 2/140	14
Installing the Shelf Brackets in the Rack	14
Installing the Shelf Brackets in HP 9000, 10000 and 11000 Series Racks	14
Figure 2: Angle brackets mounted on vertical cabinet rails in HP 9000, 10000 and 11000 series rack	15
Figure 3: Shelf brackets mounted in HP 9000, 10000 and 11000 series rack	16
Installing Shelf Brackets in an HP Rack System/e or 19-inch EIA Rack	17
Attaching the Mounting Hardware to the Director 2/140	18
Figure 4: .Securing the front mounting brackets to the Director 2/140	18
Inserting Cage Nuts in the Rack	19
Inserting the Front Cage Nuts in the Rack	19
Inserting the Rear Cage Nuts in the Rack	19
Finalizing the Rack Mounting Procedure	19
Installing the Director 2/140 in the Rack	20
Securing the Front Mounting Brackets to the Rack	20
Securing the Rear Mounting Brackets to the Rack	20
Connecting the Director 2/140 to a Power Source	21
Figure 5: AC power connections	21
Power-On Self Test	22