HP StorageWorks 2/140 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Ma - Page 209

Fibre Alliance MIB A Description Sequence The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ::= { fcConnUnitLinkEntry 10 } fcConnUnitLinkUnitTypeY Syntax FcUnitType Max-Access read-only Status current Description Type of the FC connectivity unit as defined in fcConnUnitType. Sequence ::= { fcConnUnitLinkEntry 11 } fcConnUnitLinkConnIdY Syntax OCTET STRING (SIZE(3)) Max-Access read-only Status current Description This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a 24-bit Big Endian value. If this is loop, then it is the ALPA that is connected. If this is an e-port, then it will only contain the domain ID. If not any of those, unknown or cascaded loop, return all bits set to 1. Sequence ::= { fcConnUnitLinkEntry 12 } There is one and only one statistics table for each individual port. For all objects in statistics table, if the object is not supported by the conn unit then the high order bit is set to 1 with all other bits set to zero. The high order bit is reserved to indicate if the object if supported or not. All objects start at a value of zero at hardware initialization and continue incrementing till end of 63 bits and then wrap to zero. Port Statistics fcConnUnitPortStatTable Syntax SEQUENCE OF FcConnUnitPortStatEntry Max-Access not-accessible Status current FA MIB A-43