HP StorageWorks 2/140 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Ma - Page 216

Fibre Alliance MIB A Description Sequence Count of Class 1 Frames transmitted out this port. Note, this is a Fibre Channel only stat. ::= { fcConnUnitPortStatEntry 14 } fcConnUnitPortStatC1FBSYFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that FBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 15 } fcConnUnitPortStatC1PBSYFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 16 } fcConnUnitPortStatC1FRJTFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat. A-50 E/OS SNMP Support Manual