HP StorageWorks 2/140 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Ma - Page 277
Link Reset protocol, the Loop, request NON-PARTICIPATING
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
FC Management MIB B Description This object is used to control the addressed connUnit's port. Valid commands are: resetConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'reset' operation. Examples of these operations are: the Link Reset protocol, the Loop Initialization protocol, or a resynchronization occurring between the transceiver in the addressed port to the transceiver that the port is connected to. bypassConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'bypass' operation. Examples of these operations are transitioning from online to offline, a request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by a hub. unbypassConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'unbypass' operation. Examples of these operations are the Link Failure protocol, a request(PARTICIPATING) command to the Loop Port state machine, or addition of the port to an arbitrated loop by a hub. Port Table B-33
![](/manual_guide/products/hewlettpackard-316095b21-fw-070000hafm-sw-080600-mcdata-eos-snmp-support-manual-620000131620-2005-e90560b/277.png)