HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Advanced Web Tools Administ - Page 20
Launching Advanced Web Tools, Advanced Web Tools
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Launching Advanced Web Tools You can launch Advanced Web Tools on any workstation with a compatible web browser installed. For a list of web browsers compatible with Fabric OS 5.x, see Table 2 on page 16 and Table 3 on page 16. Advanced Web Tools also supports HTTPS protocol, if that protocol is enabled for the switch. For more information on enabling the HTTPS protocol on your switch, see the HP StorageWorks Fabric OS 5.x administrator guide. Launching Advanced Web Tools 1. Launch the web browser and enter the IP address of the licensed switch in the Address field: http://10.77.77.77 or https://10.77.77.77 2. Press Enter. Depending on the switch is configuration, you might be prompted to log in to the switch at this time. See "Advanced Web Tools interface" on page 20 for more information. Advanced Web Tools Advanced Web Tools launches, as shown in Figure 2. Go to Chapter 3, Using Advanced Web Tools for instructions on using this interface. Figure 2 Advanced Web Tools interface 20 Introducing Advanced Web Tools
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-advanced-web-tools-administrator-guide-aarvhxbte-2005-3763c8d/20.png)