HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Advanced Web Tools Administ - Page 44
Configuring ports, Configuring system services
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configuring system services 1. Launch the Switch Admin module as described on page 36. 2. Disable the switch as described in "Enabling and disabling a switch" on page 39. 3. Click the Configure tab. 4. Click the System subtab. 5. Select the boxes next to the system services that you want to enable. Clear a box to disable a service. NOTE: Selecting the Disable RLS Probing box disables RLS probing. Clearing this box enables RLS probing. 6. Click Apply. 7. Enable the switch as described in "Enabling and disabling a switch" on page 39. Configuring ports Use the Ports tab of the Switch Admin module to perform the basic port configuration procedures described in this section. Figure 10 shows an example of the Ports tab. Figure 10 Ports tab 44 Managing your fabrics, switches, and ports
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-advanced-web-tools-administrator-guide-aarvhxbte-2005-3763c8d/44.png)