HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Advanced Web Tools Administ - Page 69
Modifying the RADIUS server order, Removing a RADIUS server
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Modifying the RADIUS server order The RADIUS servers are contacted in the order they are listed, starting from the top of the list and moving to the bottom. Modifying the order in which the RADIUS servers are contacted 1. Launch the Switch Admin module as described on page 36. 2. Select the AAA Service tab. 3. Click a RADIUS server from the RADIUS Configuration list. 4. Click the up and down arrows to rearrange the order of the RADIUS servers. 5. Click Apply. Removing a RADIUS server Use the following procedure to remove a RADIUS server. 1. Launch the Switch Admin module as described on page 36. 2. Select the AAA Service tab. 3. Select a RADIUS server from the RADIUS Configuration list. 4. Click Remove. If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the only RADIUS server, if the RADIUS service is the primary AAA service. The RADIUS server is not deleted until you apply the changes from the AAA Services tab. 5. Click Apply in the AAA Services tab. A confirmation is displayed, warning you that you are about to remove the selected RADIUS server. 6. Click Yes in the confirmation. Fabric OS 5.x Advanced Web Tools administrator guide 69