HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x Advanced Web Tools Administ - Page 97
Displaying Initiator/Target Accessibility Matrix
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
3. From the Name drop-down list, select a configuration to be analyzed. 4. Click Analyze Config. A dialog box opens, asking whether you want to refresh the fabric before running the analysis. 5. Click Yes or No. The configuration analysis window opens. Displaying Initiator/Target Accessibility Matrix The Initiator/Target Accessibility Matrix shows a list of initiators and a list of targets and indicates which initiator can access which target, as shown in Figure 31. 1. Launch the Zone Admin module as described on page 83. 2. Click the Config tab. 3. Select a configuration to be analyzed for device accessibility from the Name drop-down list. 4. Click Device Accessibility. The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box opens. 5. Select devices you want displayed in the accessibility matrix; select the radio button to select all devices in the fabric or to select a subset of the devices. If you select a subset, you must click the devices from the Select Devices list and click Add to move them to the Evaluate for Accessibility list. 6. Click OK. The Initiator/Target Accessibility Matrix opens. You can mouse over a target to display the symbolic name of the device. You can also right-click the device nodes and click View Device Detail to display detailed information about the selected device. Figure 31 Initiator/Target Accessibility Matrix Fabric OS 5.x Advanced Web Tools administrator guide 97
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-fabric-os-5x-advanced-web-tools-administrator-guide-aarvhxbte-2005-3763c8d/97.png)