HP StorageWorks 4/256 Brocade Converged Enhanced Ethernet Command Reference v6 - Page 108
Use this command to display LLDP statistics on all interfaces or a specified interface.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5 show lldp statistics show lldp statistics Displays the LLDP statistics on all interfaces or a specified interface. Synopsis show lldp statistics [interface tengigabitethernet slot/port] Operands interface Use this keyword to specify the 10 Gbps Ethernet interface using the following operand followed by the slot or port number. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface for which to display the LLDP statistics. slot Specifies a valid slot number. port Specifies a valid port number. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to display LLDP statistics on all interfaces or a specified interface. Usage If you do not specify the interface tengigabitethernet operand, this command displays the LLDP Guidelines statistics for all interfaces. Examples To display LLDP statistics on the specified interface: switch#show lldp statistics interface tengigabitethernet 0/8 LLDP Interface statistics for Te 0/8 Frames transmitted: 555 Frames Aged out: 0 Frames Discarded: 0 Frames with Error: 0 Frames Recieved: 554 TLVs discarded: 0 TLVs unrecognized: 0 See Also none 90 Converged Enhanced Ethernet Command Reference 53-1001347-01