HP StorageWorks 4/256 Brocade Converged Enhanced Ethernet Command Reference v6 - Page 93
Enables debugging for Link Layer Discovery Protocol LLDP., Specifies the 10 Gbps Ethernet interface.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
debug lldp packet 5 debug lldp packet Enables debugging for Link Layer Discovery Protocol (LLDP). Synopsis debug lldp packet {all | interface tengigabitethernet slot/port} [both | detail [both | rx | tx ] | rx | tx] no debug lldp packet { all | interface tengigabitethernet slot/port } Operands all Turns on LLDP packet debugging on all interfaces. interface tengigabitethernet Specifies the 10 Gbps Ethernet interface. slot Specifies the slot number. port Specifies the port number. both Turns on debugging for both transmit and receive packets. detail Turns on debugging with detailed information. rx Turns on debugging for only received LLDP packets. tx Turns on debugging for only transmitted LLDP packets. Defaults By default, debugging is not turned on. Command Privileged EXEC mode Modes Description Use this command to enable debugging for Link Layer Discovery Protocol (LLDP). Use the no debuglldp packet command to disable debugging. Usage Guidelines Examples To display debugging outputs on a particular cmsh session, use the terminal monitor command. To enable debugging of LLDP for both received and transmitted packets on 10 Gbps Ethernet interface 0/1: switch#debug lldp packet interface tengigabitethernet 0/1 both switch#show debug lldp LLDP debugging status: Interface te0/1 : Transmit Receive See Also show debug lldp Converged Enhanced Ethernet Command Reference 75 53-1001347-01