HP StorageWorks 4/256 Brocade Converged Enhanced Ethernet Command Reference v6 - Page 117
lacp system, priority, Sets the Link Aggregation Control Protocol LACP system priority.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
lacp system-priority 6 lacp system-priority Sets the Link Aggregation Control Protocol (LACP) system priority. Synopsis lacp system-priority value no lacp system-priority Operands value Specifies the value of the LACP system priority. The range of valid values is 1-65535. Defaults The default system-priority value is 32768. Command Global configuration mode Modes Description Use this command to set the system priority of a local system. This determines which system is responsible for resolving conflicts in the choice of aggregation groups. Use the no lacp system-priority command to reset the system priority to the default value. Note Lower numerical values have higher priorities. Usage There are no usage guidelines for this command. Guidelines Examples To set the LACP system-priority to 68: switch(config)#lacp system-priority 68 To clear the configured LACP system-priority: switch(config)#no lacp system-priority See Also none Converged Enhanced Ethernet Command Reference 99 53-1001347-01