HP StorageWorks 4/256 Brocade Converged Enhanced Ethernet Command Reference v6 - Page 70
The range of valid values is 2-3583.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3 switchport trunk switchport trunk Adds or removes tagged VLANs on a Layer 2 interface. Synopsis switchport trunk allowed vlan {add vlan_id | all | except vlan_id | none | remove vlan_id} no switchport trunk Operands allowed vlan add vlan_id all except vlan_id none remove vlan_id Sets the VLANs that will transmit and receive through the Layer 2 interface. Adds a VLAN to transmit and receive through the Layer2 interface. The range of valid values is 2-3583. Allows all VLANs to transmit and receive through the Layer 2 interface. Allows all VLANs except the VLAN ID to transmit and receive through the Layer 2 interface. The range of valid values is 2-3583. Allows no VLANs to transmit and receive through the Layer 2 interface. Removes a VLAN that transmits and receives through the Layer 2 interface. The range of valid values is 2-3583. Defaults There are no default configurations for this command. Command Interface configuration mode Modes Description Use this command to add or remove tagged VLANs on a Layer 2 interface. Usage There are no usage guidelines for this command. Guidelines Examples To set the tagged VLAN on an interface to 100: switch(conf-if-te-0/19)#switchport truck allowed vlan add 100 To remove the tagged VLAN 100 from the interface: switch(conf-if-te-0/19)#switchport truck allowed vlan remove 100 See Also show vlan brief, show interface switchport, switchport mode, switchport trunk 52 Converged Enhanced Ethernet Command Reference 53-1001347-01