HP StorageWorks 4/256 Brocade Fabric OS Command Reference Guide v6.0.0 (53-100 - Page 194
fcpRlsShow, Displays the Fibre Channel Protocol FCP Read Link Status RLS information.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
2 fcpRlsShow fcpRlsShow Displays the Fibre Channel Protocol (FCP) Read Link Status (RLS) information. Synopsis fcprlsshow [slotnumber/]portnumber Description Use this command to display the FCP RLS information for the specified F_Port or FL_Port. This information describes the number of loss-of-signal, loss-of-sync, CRC-error, and other failure events that have been detected on this port. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is required. Examples To display the FCP RLS information: switch:admin> fcprlsshow 2/5 0xda 0xdc link fail 0 0 loss sync 5 3 loss sig 0 0 prtc err 0 0 bad word 525 330 crc err 0 0 See Also portLoginShow, portLogShow 168 Fabric OS Command Reference 53-1000599-01