HP StorageWorks 4/256 Brocade Fabric OS Command Reference Guide v6.0.0 (53-100 - Page 598
setGbicMode, Specify 1 to enable media mode or 0 to disable media mode. If no mode is
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 598 highlights
2 setGbicMode setGbicMode Enables or disables media mode. Synopsis setgbicmode [mode | -show] Description Use this command to enable GBIC media mode if the mode value is nonzero and disable the media mode if the mode value is 0. The mode is saved in flash memory and stays in that mode until the next execution of setGbicMode. The mode becomes active as soon as this command is executed. It does not require a reboot to take effect. Media mode modifies the behavior of the diagnostic test methods so that ports without media installed are not tested. Diagnostic tests may fail if any port is not operating properly, but with media mode enabled, the functional tests are skipped on ports that do not contain media. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: mode Specify 1 to enable media mode or 0 to disable media mode. If no mode is specified, the current value is displayed. Any other value will enable media mode. -show Specify the -show operand to display the current setting. This operand is optional. Examples To enable the media mode: switch:admin> setgbicmode 1 GBIC mode is now 1 (Enabled). See Also itemList, miniCycle, setMediaMode, setSfpMode 572 Fabric OS Command Reference 53-1000599-01