HP StorageWorks 4/64 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 118
AUTH-1034, command and contact your switch service provider.
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
4 AUTH-1034 Recommended Add the entity's world wide name (WWN) to the SCC policy and reinitialize authentication by using Action the portDisable and portEnable commands or the switchDisable and switchEnable commands. Severity ERROR AUTH-1034 Message , [AUTH-1034], ,, ERROR, , Failed to validate name in : port . Probable Cause Indicates that the specified entity name in the payload is not in the correct format. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1035 Message , [AUTH-1035], ,, ERROR, , Invalid length in message: length , port . Probable Cause Indicates that a particular data field in the authentication message has an invalid length field. This error usually relates to internal failure. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1036 Message , [AUTH-1036], ,, ERROR, , Invalid state for : port . Probable Cause Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. 48 Fabric OS Message Reference 53-1001338-01