HP StorageWorks 4/64 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 474
IPS-1005, IPS-1006
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
54 IPS-1005 Probable Cause Indicates that configured Port Mode is different from the intended use. Recommended Change the port configuration (by deleting configured FCIP tunnels or iSCSI sessions) to return the Action port mode to neutral before attempting to configure the port for a different mode or use. Severity WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Indicates that tunnel setup failed because of an authorization failure from the remote side. A reason for such a failure could be a WWN mismatch. Recommended Change the tunnel configuration on one side of the tunnel to authorize the remote side to set up Action the tunnel. Severity WARNING IPS-1006 Message , [IPS-1006], ,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () Probable Cause Indicates that tunnel setup failed because of a configuration mismatch between the two ends. The reason for such a mismatch could be a Compression setting or WanTOV enforcement. Recommended Change the tunnel configuration on one side of the tunnel to match that of the other side to set up Action the tunnel. Severity WARNING 404 Fabric OS Message Reference 53-1001338-01