HP StorageWorks 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Se - Page 29
Configuring Product Identification, Con product Identification tab view, Activate
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Configuring the Product 3. Click Activate to save and activate the changes. The following message displays: Your changes to the port configuration have been successfully activated. 4. If the product is offline, set the product online as follows: a. Choose Operations from the navigation panel. The Operations page displays. b. Click the Online State tab, then click Set Online. The following message message displays: Your operations changes have been successfully activated. Configuring Product Identification Perform this procedure to configure the HP product's name, description, location, and contact person. The Name, Location, and Contact variables configured here correspond respectively to the variables used by SNMP management workstations when obtaining data from managed edge switches or directors. To configure identification: 1. Choose Configure from the navigation panel. Choose the Switch or Director tab, as appropriate. The Switch or Director tab displays with the Identification tab view (Figure 5). Figure 5: Configure product Identification tab view Embedded Web Server User Guide 29