HP StorageWorks 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Se - Page 69
Configuring Zone Sets, Zone Set tab view, Con Zoning, Zone Set
![]() |
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Configuring Zones Configuring Zone Sets Perform this procedure to configure, change, enable, or disable zone sets. A zone set is a group of zones that is activated or deactivated as a single entity across all managed products in either a single switch or a multiswitch fabric. Only one zone set can be active at one time. To configure zone sets: 1. Choose Configure from the navigation panel. 2. Choose the Zoning tab and the Zone Set tab. The Zone Set tab view displays (Figure 22). Figure 22: Zone Set tab view 3. Click Save and Activate Zoning Configuration. After the zone set name is validated, a confirmation dialog box displays. 4. Click OK to save and activate the new zone set. The following message displays: Your changes to the Zoning configuration have been successfully activated. Note the following: ■ Rename zone set - To rename a zone set, type the new name in the Zone Set Name field. Click Rename Zone Set. The new zone set name is validated and changed. Note: If no name is specified, the name NEW_ZONE_SET is used. Embedded Web Server User Guide 69
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070100-hp-storageworks-embedded-web-server-user-guide-aartdrbte-2003-8e3c0e7/69.png)