HP StorageWorks 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Se - Page 77
Segmented, E_Port, Invalid Attachment, Inactive, Segmented E Port, No Response from Attached Switch
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Viewing Product and Fabric Data ■ Reason - When the port operating state is Segmented E_Port, Invalid Attachment, or Inactive, this field displays the reason for that state. When an E_Port is segmented, two fabrics are prevented from joining. This only occurs when the switch is attempting to connect to another switch. Reasons and probable causes are as follows: - If Operational State is Segmented E Port: - Segment Not Defined - Incompatible Operating Parameters - Duplicate Domain ID(s) - Incompatible Zoning Configurations - Build Fabric Protocol Error - No Principal Switch - No Response from Attached Switch - ELP Retransmission Failure Timeout - If Operational State is Invalid Attachment: - Unknown - ISL connection not allowed on this port - ELP rejected by the attached switch - Incompatible switch at other end of the ISL - External loopback adapter connected to the port - N_Port connection not allowed on this port - Non-HP high availability fabric switch or compatible switch at other end of the ISL - ISL connection not allowed to external Fabrics - Port binding violation - unauthorized WWN - Unresponsive node connected to Port Embedded Web Server User Guide 77