HP StorageWorks 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Se - Page 35
Configuring Fabric Parameters, Fabric Parameters tab view, Operations, Online State
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Configuring the Product Configuring Fabric Parameters Perform this procedure to configure the fabric operating parameters, including resource allocation time out value (R_A_TOV), E_D_TOV, product priority, and interop mode. The product must be set offline. To configure parameters: 1. If product is online, set the product offline as follows: a. Choose Operations from the navigation panel. The Operations page displays. b. Click the Online State tab, then click Set Offline. The following message displays: Your operations changes have been successfully activated. 2. Choose Configure from the navigation panel. 3. Click the Switch or Director tab (as appropriate), then click the Fabric Parameters tab. The Fabric Parameters tab view displays (Figure 8). Figure 8: Fabric Parameters tab view a. At the BB_Credit field, type a value between 1 and 60. (This field is not available for the Edge Switch 2/24.) Configure the product to support buffer-to-buffer credit (BB_Credit) from 1 through 60. This is the value used for all ports, except those configured for extended distance buffering (10-100 km). The default value is 16. For a description of the buffer-to-buffer credit, refer to industry specification, Fibre Channel Physical and Signaling Interface. Embedded Web Server User Guide 35