HP StorageWorks 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 151
con Remote State Change Notifications RSCN transmission mode
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
configure 2 configure Changes switch configuration settings. Synopsis configure Description Use this command to change switch configuration settings. Beginning with Fabric OS v6.2.0, configuration data is grouped into chassis information and switch information. Each configuration type is managed separately. For information on file format and specific parameters contained in each section, refer to the configUpload help page. The behavior of configure depends on the environment in which the command is executed: • In a Virtual Fabric environment, the configure command sets switch configuration parameters for the current logical switch only. If a switch or chassis is configured with multiple logical switches, you must configure each logical switch separately. Use setContext to change the current logical switch context. • In a non-Virtual Fabric environment, the configure command sets switch configuration parameters. To configure chassis-wide parameters, use the configureChassis command. The following switch configuration parameters can be set with the configure command: • Switch fabric parameters • Virtual channel parameters • F_Port login parameters • Zoning operation parameters • Remote State Change Notifications (RSCN) transmission mode • Arbitrated Loop parameters • System Services settings • Portlog Events enable or disable settings • Secure Socket Layer (SSL) attributes • Remote Procedure Call Daemon (RPCD) attributes • WebTools attributes To access all parameters controlled by this command, you must disable the switch using the switchDisable command. If executed on an enabled switch, only a subset of attributes are configurable. Notes The Telnet interface is no longer configurable with this command. Use the ipFilter command to enable or disable the Telnet interface. The SNMP attributes are no longer configurable with this command. Use snmpConfig --set seclevel to configure SNMP attributes. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Fabric OS Command Reference 121 53-1001337-01