HP StorageWorks 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 734
To display TCP connections for the circuits on the tunnel
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 734 highlights
2 portShow To display additional performance parameters on tunnel 16 (add -c to display the info for all circuits): switch:admin> portshow fciptunnel 17 --perf Tunnel ID: 17 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Moderate) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:55:59:e9 Peer WWN: 10:00:00:05:1e:55:68:05 Circuit Count: 4 Flags: 0x00000000 FICON: Off Oper Status: Up Flow Ctrl State: On Connected Count: 2 Tunnel Duration: 6 hours, 52 minutes, 18 seconds Compression Statistics: 10588 Uncompressed Bytes 7400 Compressed Bytes 1.43 : 1 Compression Ratio Performance Statistics: Overall Throughput 285016 Output Bytes 14 Bps 30s Avg, 11 Bps Lifetime Avg 2642 Output Packets 0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg 534396 Input Bytes 14 Bps 30s Avg, 21 Bps Lifetime Avg 2754 Input Packets 0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg To display TCP connections for the circuits on the tunnel: switch:admin>portshow fciptunnel 17 -c --tcp Tunnel ID: 17 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Moderate) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:55:59:e9 Peer WWN: 10:00:00:05:1e:55:68:05 Circuit Count: 4 Flags: 0x00000000 FICON: Off Circuit ID: 17.0 Circuit Num: 0 704 Fabric OS Command Reference 53-1001337-01