HP StorageWorks 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 753
To display details on the FDCB specified in the, argument, which was derived from the previous
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 753 highlights
portShow 2 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 9 Uptime 23 hours, 19 minutes, 45 seconds Streaming TCP vars: head index = 24 tail index = 24 Current Count = 0 Pending Frames High = 16 Segment Count High = 3 Data Mover Restarts = 0 Data Mover Desc Full = 0 Frame Too Large Count = 0 Max Reference Count = 15 Max Frame Size = 2116 Max Segments Pulled = 0 Reached Max Pending Frames = 0 FCIP Smoothed RTT = 202 ms FCIP RTT Variance = 1 ms FC control traffic TCP connection: Local 192.168.32.1:4129, Remote 192.168.32.2:3225 Data transfer TCP connection: Local 192.168.32.1:4130, Remote 192.168.32.2:3226 To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 1 -epcb -clear To display a list of discovered devices and selected path and status information on each. Get the adrs from this display for the next command: switch:admin> portshow ficon ge0 all -fdcb To display details on the FDCB specified in the adrs argument, which was derived from the previous example: switch:admin> portshow ficon ge0 all -fdcb 10008000 To display the same information as the previous example but with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 all -fdcb 10008000 -clear To display the inband management interfaces configured on the Brocade 7500: switch:admin> portshow inbandmgmt ge1 Port: ge1 Inband Management: Enabled CP Interface IP Address NetMask MTU 0 192.168.255.1 255.255.255.252 1500 GE Interface IP Address NetMask MTU 0 192.168.255.2 255.255.255.252 1500 Fabric OS Command Reference 723 53-1001337-01