HP StorageWorks 8/8 Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 132
EM-1010, Probable Cause, Recommended, Action, chassisConfig, Severity, Message
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
12 EM-1010 Probable Cause Indicates that the environmental monitor (EM) received an unexpected power-down notification from the specified field-replaceable unit (FRU). This might indicate a hardware malfunction in the FRU. Recommended Action Try reseating the FRU. If the message persists, replace the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 Message , [EM-1010], , FFDC, CRITICAL, , Received unexpected power down for But still has power. Probable Cause Indicates that the environmental monitor (EM) received an unexpected power-down notification from the specified field-replaceable unit (FRU). However, the specified FRU still appears to be powered up after four seconds. Recommended Try reseating the blade. If this fails to correct the error, replace the blade. Action Severity CRITICAL EM-1011 Message , [EM-1011], , FFDC, CRITICAL, , Received unexpected power down for , but cannot determine if it has power. Probable Cause Indicates that the environmental monitor (EM) received an unexpected power-down notification from the field-replaceable unit (FRU) specified; however, after four seconds it cannot be determined if it has powered down or not. Recommended Try reseating the blade. If this fails to correct the error, replace the blade. Action Severity CRITICAL EM-1012 Message , [EM-1012], , FFDC, CRITICAL, , failed state transition, FRU faulted. Probable Cause Indicates that a switch blade or nonbladed switch failed to transition from one state to another. It is faulted. The specific failed target state is displayed in the message. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action On Brocade DCX, 24000 and 48000, try reseating the indicated field-replaceable unit (FRU). If the message persists, reboot or power cycle the switch. 80 Fabric OS Message Reference 53-1000600-02