HP StorageWorks 8/8 Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 470
SEC-1328, and contact your switch service provider.
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
66 SEC-1328 Probable Cause Strict policy is conflicting. Recommended Action None, the domain is denied by disallowing all its E-ports connected to the fabric. If the domain should be allowed to merge with the fabric, then resolve the issue by making the conflicting policies same. Severity WARNING SEC-1328 Message , [SEC-1328], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because Authentication Policy is enabled on the switch. Recommended Action Verify that the security event was planned. If the security event was planned, run the authUtil --policy passive command to disable the Authentication Policy and retry the secModeEnable command. Severity ERROR SEC-1329 Message , [SEC-1329], ,, ERROR, , IPFilter enforcement: Failed to enforce ipfilter policy of type because of . Probable Cause Indicates that the IP filter policy enforcement failed due to internal system failure. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1330 Message , [SEC-1330], ,, ERROR, , command failed - db(s) are coming from a non-Primary switch. Probable Cause Indicates that an attempt was made to distribute database(s) either from a backup fabric configuration server (FCS) switch or from a non-FCS switch. Recommended Verify that the distribution is initiated by the primary FCS switch. Use the secPolicyShow command Action to verify and correct the configuration if necessary. Severity ERROR 418 Fabric OS Message Reference 53-1000600-02