HP StorageWorks 8/8 Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 266
FW-1180, FW-1181, FW-1182
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
30 FW-1180 Probable Cause Indicates that the number of invalid words that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1180 Message , [FW-1180], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has changed. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that all optical hardware is clean. Severity INFO FW-1181 Message , [FW-1181], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has fallen below the low boundary. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message Probable Cause , [FW-1182], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has risen above the high boundary. 214 Fabric OS Message Reference 53-1000600-02