HP StorageWorks 8/8 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, - Page 627
Specifies the gateway IP address. This operand is optional if
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 627 highlights
portCfg 2 routeadd destination netmask [gateway] Adds a route to the management station for an existing CP or GbE port (CP or GbE designation is made automatically). You must specify the destination IP address and the subnet mask when adding a management route. You must create the IP addresses for the CP and the GbE port interfaces before you can add a route to the routing table. Use portshow iproute to display existing routes. Use portshow inbandmgmt to display the management interface status and IP addresses. routedel destination netmask Deletes a management route from an internal CP or a GbE port interface. You must specify the destination and the subnet mask when deleting a management route. destination Specifies the destination for the route. This is the IP address of the management station. This operand is required when adding or deleting a route. netmask Specifies the subnet mask. This operand is required when adding or deleting a route. gateway Specifies the gateway IP address. This operand is optional if the destination is in the same subnet as one of the IP interface addresses. If the destination is not part of the same subnet, you must specify a gateway IP address. Examples To configure the internal addresses for the CP and GbE port inband management interfaces: switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0 switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0 To add a route to a management station that is on the same subnet as the management interface IP addresses in the previous example: switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 To configure a route for a management station that is on a different subnet (note the added gateway IP address): switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 192.168.1.250 See Also portCfgShow, portCmd, portShow, switchShow, configure, fastWriteCfg Fabric OS Command Reference 597 53-1001337-01