HP StorageWorks 8/8 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, - Page 657
portCfgShow, AL_PA Offset 13
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 657 highlights
portCfgShow 2 portCfgShow Displays port configuration settings. Synopsis portcfgshow portcfgshow [slot/]port portcfgshow option [slot/][ge_port] [arguments] [optional_arguments] Description Use this command to display the current configuration of a port. The behavior of this command is platform-specific; output varies depending on port type and platform, and not all options are supported on all platforms. "Non-GbE port displays" on page 627 If no operand is specified, this command displays port configuration settings for all ports on a switch, except Gigabit Ethernet (GbE) ports. "Displays supported on the Brocade 7800 /FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms" on page 630 Use this command with optional arguments to display the following FCIP parameters configured for a GbE port on the Brocade 7800/FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms. • IP interfaces on the GbE port • Static routes on the IP interfaces • Address resolution protocol (ARP) entries "Displays supported only on the Brocade 7500/7500E/FR4-18i platforms" on page 630 • Fibre Channel over IP (FCIP) tunnel configuration settings - IKE and IPSec policy information - QoS mappings • Port Mode information • VLAN tag configuration • Inband Management IP addresses and routes configured on the Brocade 7500 Non-GbE port displays The following information is displayed when the command is issued for all ports or for a specific port: Area Number Displays the port area number. This field is displayed only when portCfgShow is executed for a specific port. Speed Displays Auto for auto speed negotiation mode, or a specific speed of 1, 2, 4, or 8 Gbps. This value is set by the portCfgSpeed command. Fill Word Displays 0(Idle-Idle) or 1(arbff-arbff). This parameter is set by the portcfgFillword command. AL_PA Offset 13 Displays (...) or OFF when the arbitrated loop physical address (AL_PA) on the port is configured to use a 0x0 AL_PA address (default). Displays ON when the address configuration is 0x13 AL_PA. This value is set by the portCfgAlpa command. Fabric OS Command Reference 627 53-1001337-01