HP StorageWorks Modular Smart Array 1000 HP Array Configuration Utility User G - Page 33

* ArrayAccelerator = Enable|Disable * LogicalDriveSSPState = Enable|Disable * SSPAdaptersWithAccess = [N],[N]...|None PreferredPath = 1|2 HBA_WW_ID = WWN ConnectionName = UserDefinedName HostMode = Default|Windows|Windows(degrade)|openVMS|Tru64|Linux |Solaris|Netware|HP|Windows Sp2 Script file options There are four categories of options in ACU script files: Control, Controller, Array, and Logical Drive. Each category has several scripting options, but you do not always need to assign values to every option. ACU can use default values in some cases, while in other cases, a given option might not be relevant for a particular controller or operating mode. The options for each category are listed in the table ("Option categories in ACU scripting" on page 33), and described in more detail in the rest of this section. Option categories in ACU scripting Category Control Options Action Method Controller Array Controller ClearConfigurationWithDataLoss LicenseKey DeleteLicenseKey ChassisName ReadCache WriteCache RebuildPriority ExpandPriority SurfaceScanDelay SSPState PreferredPathMode Array OnlineSpare Drive Comments These options define the overall behavior of ACU when it processes the scripts and creates configurations. Control options can occur only once in a script file and must be the first options listed. Options in this category define the controller that is to be configured (or the controller that has had its configuration captured). The Controller option must be at the beginning of this section of the script, but you can script other options in this category in any order. You can use one script to configure several controllers if all controllers are to be configured identically or if you define each controller configuration separately. When you define each controller separately, specify all category options for a particular controller before starting a new controller listing. These options define an array that is to be configured on the controller that is identified previously in the script. (If no controller is previously identified, ACU sends an error message.) The Array option must be at the beginning of this section of the script, but you can script the other options in this category in any order. Scripting in ACU 33