HP StorageWorks Modular Smart Array 1000 HP Array Configuration Utility User G - Page 42
Invalid Preferred Path Mode., Invalid SSP adapter ID.
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Message Internal error. Invalid array accelerator setting. Invalid array. Invalid ChassisName. Invalid ClearConfigurationWithDataLoss parameter. Invalid Controller. Invalid expand priority. Invalid license key. Invalid logical drive. Invalid Method. Invalid physical drive. Invalid Preferred Path. Invalid Preferred Path Mode. Invalid RAID. Invalid read cache/write cache ratio. Invalid rebuild priority. Invalid Sectors. Invalid Size. Invalid Spare. Invalid SSP adapter ID. Invalid SSP state. Invalid stripe size. Invalid SurfaceScanDelay. License key is not a controller feature license key. Logical drive not specified. More than one (text) command cannot exist in the same section. Comment or explanation (if not self-explanatory) An internal ACU error has occurred, and some error is not being identified properly. The specified array accelerator setting is invalid or is not supported with the current configuration. The array ID is invalid. The entered ChassisName is invalid. Use characters from the set a- z, A-Z, 0-9 and [space]. The ID cannot end with a space character or exceed the maximum number of characters allowed by the controller. - - The specified expand priority is not supported, or the controller does not allow expansion and, therefore, does not support the Expand Priority feature. - The logical drive ID is not valid. Invalid Method value. The physical drive listed for the array is not a valid physical drive, or it is a physical drive that is not capable of being placed in the array. The preferred path specified is not a valid chassis slot for an available active controller, or the controller is not available. The preferred path mode is not a valid preferred path mode, or the controller is not available. The specified RAID level is invalid or is not possible with the current configuration. The specified cache ratio is not supported by either the controller or the current controller configuration. - The specified MaxBoot setting is invalid or is not supported with the current configuration. The specified size is invalid or is not possible with the current configuration. The spare drive listed for the array is not a valid spare drive, or it is a drive that cannot be placed on the array as a spare. - - The specified stripe size is either invalid, not supported with the current RAID level, or not supported with the current configuration. - The entered license key is for a feature that the controller does not support. Some commands require a logical drive, but no logical drive is specified in the script file. The specified command should be used only once per section. Scripting in ACU 42
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-hp-array-configuration-utility-user-guide-416146001-2006-00f7a31/42.png)