HP StorageWorks Modular Smart Array 1000 HP Array Configuration Utility User G - Page 52
Expanding an array, Extending a logical drive, Managing spare drives, IMPORTANT, Syntax
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Expanding an array You can increase the storage space on an array by adding physical drives. However, the added drives must be of the same type (for example, parallel SCSI or SATA), and they must each have a capacity no less than that of the existing drives in the array. IMPORTANT: An array expansion, logical drive extension, or logical drive migration takes about 15 minutes per gigabyte, or considerably longer if the controller does not have a battery-backed cache. While this process is occurring, no other expansion, extension, or migration can occur simultaneously on the same controller. Syntax: add drives allunassigned [forced] where is an array (or a logical drive, if the array contains only one logical drive). The parameter forced represses warning message prompts. If you add an odd number of drives to an array that contains at least one RAID 1+0 logical drive, the CLI displays a prompt that asks if it is acceptable to convert the RAID 1+0 logical drive to RAID 5 (or RAID 6 (ADG) if the controller supports this RAID level). Adding the forced parameter to the command prevents this prompt from appearing. Example commands: => ctrl slot=3 array A add drives=1:0,1:1 => ctrl slot=4 ld 1 add drives=allunassigned => ctrl slot=5 array A add drives=1:1-1:5 Extending a logical drive If the operating system supports logical drive extension, you can use any unassigned capacity on an array to enlarge one or more of the logical drives on the array. IMPORTANT: An array expansion, logical drive extension, or logical drive migration takes about 15 minutes per gigabyte, or considerably longer if the controller does not have a battery-backed cache. While this process is occurring, no other expansion, extension, or migration can occur simultaneously on the same controller. Syntax: modify size=#|max|? [forced] where is a logical drive. If the operating system does not support logical drive extension, carrying out this command would make data on the logical drive unavailable. Therefore, the CLI displays a warning prompt as a safeguard in case you are using such an operating system. To prevent the prompt from appearing, use the forced parameter. Example commands: => ctrl slot=3 ld 1 modify size=max => ctrl slot=4 ld 1 modify size=? => ctrl slot=3 ld 2 modify size=500 forced Managing spare drives Assigning online spares to an array enables you to postpone replacement of faulty drives. However, it does not increase the fault-tolerance level of any logical drives in the array. For example, a logical drive in a RAID 5 configuration suffers irretrievable data loss if two physical drives fail, regardless of the number of spare drives assigned to it. Using the Command Line Interface 52
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-hp-array-configuration-utility-user-guide-416146001-2006-00f7a31/52.png)