HP StorageWorks XP12000 HP StorageWorks XP Disk Array Configuration Guide: IBM - Page 18
Changing the device parameters using SMIT, Start SMIT.
![]() |
View all HP StorageWorks XP12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
5. Repeat these steps for each OPEN-x device on the disk array. TIP: The lsattr command also shows other useful information, such as LUN ID of the mapped LDEV, worldwide name of the disk array FC port, and N-Port ID. Another useful command for determining the slot position and port worldwide name of the FCA is the lscfg -v -l hdiskx command. Changing the device parameters using SMIT 1. Start SMIT. (Optional) For an ASCII session, use the smit -C command. 2. Select Devices. Example System Management Move cursor to desired item and press Enter. Software Installation and Maintenance Software License Management Devices System Storage Management (Physical & Logical Storage) Security & Users Communications Applications and Services Print Spooling Problem Determination Performance & Resource Scheduling System Environments Processes & Subsystems Applications Using SMIT (information only) 3. Select Fixed Disk. 4. Select Change/Show Characteristics of a Disk. 5. Select the desired device from the Disk menu. The Change/Show Characteristics of a Disk screen for that device is displayed. 18 Installing and configuring AIX for the XP disk array
![](/manual_guide/products/hewlettpackard-storageworks-xp10000-hp-storageworks-xp-disk-array-configuration-guide-ibm-aix-a595196113-2010-2422db3/18.png)