HP Surestore 160fx Optical Drive and Library SCSI-2 Command Reference - Page 160
Mode Select Group 2 Command 55H, Parameter List, Length, Medium Type, Block, Descriptor
View all HP Surestore 160fx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
SCSI-2 Drive Commands Table 2-117 SCSI-2 Drive Command Set Mode Select (Group 2) Command (55H) Parameter List Length This field specifies the length in bytes of the MODE SELECT parameter list that the initiator will transfer to the drive during the DATA OUT phase. A length of 0 indicates that no data will be transferred. This condition is not considered an error. The Mode Select Parameter List contains an 8-byte header followed by 0 or 1 block descriptors, and followed by 0 or more pages (see Table 2-117 on page 2-123). Mode Select Header Byte 7 6 5 4 3 2 1 0 0 Reserved (0) 1 Reserved (0) 2 Medium Type 3 Reserved (0) 4 Reserved (0) 5 Reserved (0) 6 Block Descriptor Length (MSByte) 7 Block Descriptor Length (LSByte) Medium Type The Medium Type field will be set to 00H (default, only one medium type supported), 02H (write-once optical disks) or 03H (optical reversible or erasable medium). Block Descriptor Length The Block Descriptor Length specifies the length in bytes of the block descriptor, equal to 0 or 8. A Block Descriptor Length of 0 indicates that no block descriptors are included in the parameter list. This condition is not considered an error. Chapter 2 2-123