HP Surestore 160fx Optical Drive and Library SCSI-2 Command Reference - Page 89
Reserve Command (16H),
View all HP Surestore 160fx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
SCSI-2 Drive Command Set Reserve Command (16H) Table 2-45 Reserve Command (16H) This command is used to reserve the drive for use by a single SCSI initiator if and when the drive is connected to multiple initiators. Reserve Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (16H) 1 Logical Unit Number 3rd 3rd Party Device ID Rsvd (0) Pty (0) 2 Reserved (0) 3 Reserved (0) 4 Reserved (0) 5 Reserved (0) Flag Link The reservation is effective until one of the following occurs: • The Reserve initiator sends another valid Reserve Command • The Reserve initiator releases using a Release Command • Any initiator sends a Bus Device Reset message • A Reset conditions occurs Once RESERVED, other initiator commands (except Inquiry and Request Sense) for the logical unit are rejected and result in a "Reservation Conflict" status. A Release Command sent by another initiator is ignored. 3rdPty A 3rd Pty bit of 1 indicates that the drive is reserved for the SCSI device specified in the Third Party Device ID field. 3rd Pty Device ID 3rd Pty Device ID indicates identification of the SCSI device for which the drive is to be reserved. 2-52 Chapter 2