HP Surestore Tape Library Model 10/180 HP Tape Library Configuration Guide - Page 12
Verifying the, Installation
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Verifying the Installation Confirm that the communications path to the robotics controller is functional: 1. Compile the SCSI I/O test program: cc /usr/contrib/src/scsi_io.c. -o/usr/contrib/ bin/scsi_io 2. Run the SCSI I/O test program, using the device file created during installation. For example, if the device file name is /dev/ rmt/HPA1234, the command would be: /usr/contrib/bin/scsi_io /dev/scsi/HPA1234 If the robotics is correctly configured, the following appears: the thing claims to be: HP C7200-8000 NOTE HP C7200-8000 is used only as an example. The actual ioscan output will reflect the product number and firmware revision of the library you are configuring. 10 Configuring the Host System
10
Configuring the Host System
Verifying the
Installation
Confirm that the communications path to the robotics controller is
functional:
1.
Compile the SCSI I/O test program:
cc /usr/contrib/src/scsi_io.c. -o/usr/contrib/
bin/scsi_io
2.
Run the SCSI I/O test program, using the device file created
during installation. For example, if the device file name is
/dev/
rmt/HPA1234
, the command would be:
/usr/contrib/bin/scsi_io /dev/scsi/HPA1234
If the robotics is correctly configured, the following appears:
the thing claims to be: HP C7200-8000
NOTE
HP C7200-8000 is used only as an example. The actual
ioscan output will reflect the product number and firmware
revision of the library you are configuring.