HP Surestore Tape Library Model 10/180 HP Tape Library Configuration Guide - Page 28
Test Unit Ready
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Table 5 Category Tests Utility Options Help Drive Expert Tool Command Command Effect Test Unit Ready Performs "Test Unit Ready" command on drive. Selftest Executes the drive's built-in diagnostic tests. Tape Validate Reads a suspect tape until data ends or an error is detected. Write Test Writes data to a tape, reads it back, and compares. Tape Copy Performs a tape-to-tape copy. Load Tape Performs a load sequence. Unload Tape Performs an unload sequence. Rewind Rewinds to the beginning of a tape. Mode Sense Displays user selected mode page data. Mode Select Allows user to change selected mode select settings. Media Removal Prevents or allows media removal. Data capture Runs the "tape_capture -D -m" command and displays the results. Display Format Displays data as either raw hex, decoded format text, or both. General Help Brings up the dialog box with various help topics about the expert tool command. Version Displays the version number of the expert tool command. 26 Diagnostic support tools