HP Surestore Tape Library Model 10/180 HP Tape Library Configuration Guide - Page 26
Types of STM, Tools for Tape, Libraries
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Types of STM Tools for Tape Libraries Table 4 Tool Type • The OS Error Log contains information logged by I/O drivers and other operating system components. Review this log to check for hardware errors. Tools -> Utility -> Run... -> logtool Table 4 on page 24 shows which types of STM tools are supported on the robotic and tape drive components of the library. Not all commands are supported on all libraries. Supported Tool Characteristics Description Supported For Information tools Verifiers Exercisers Diagnostics Expert tools Firmware update tools Provides quick access to information about a device Provides a quick verification that a device is properly connected and functional Stresses the hardware and assists in reproducing intermittent problems Tests a device, and isolates a failure to the most likely FRU Interactive tool that assists in troubleshooting Interactive tool that updates the firmware Drives X X X X X X Robotics X X X X NOTE 24 Diagnostic support tools Within STM, the robotics component of a library is represented with an icon or text identifier of SCSI Media Changer. The tape drive is represented with an icon or text identifier indicating the type of drive.