HP Surestore Tape Library Model 10/180 HP Tape Library Configuration Guide - Page 14
SYSGEN version E ..
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
/4/4.1.0 DLT8000 . . . /4/4.2.0 DLT8000 . . . /4/4.3.0 DLT8000 . . . /4/4.4.0 DLT8000 . . . 3. Boot the system. At the MPE prompt, run sysgen and start the io section: sysgen SYSGEN version E . . . sysgen> io ** IO configurator commands ** 4. If not already configured, configure the differential card and the pseudo/target level of the SCSI path: io> apath 10/4/4 id=HP28696A io> apath 10/4/4.0 id=pseudo io> apath 10/4/4.1 id=pseudo io> apath 10/4/4.2 id=pseudo io> apath 10/4/4.3 id=pseudo io> apath 10/4/4.4 id=pseudo 5. Configure the robotics controller and the drives (the pass-thru driver): io> adev 30 id=HPA4669A path=10/4/4.0.0 io> adev 31 id=DLT8000 path=10/4/4.1.0 mode=autoreply io> adev 32 id=DLT8000 path=10/4/4.2.0 mode=autoreply io> adev 33 id=DLT8000 path=10/4/4.3.0 mode=autoreply io> adev 34 id=DLT8000 path=10/4/4.4.0 mode=autoreply 6. Verify the bindings between PATH, LDEV number, ID, PMGR (device drivers), and LMGR attributes for each device configured. 12 Configuring the Host System
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-220-hp-tape-library-configuration-guide-61dd88f/14.png)