HP Surestore Tape Library Model 6/140 SAN Solution Installation Guide - Page 26
Caution
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
CAUTION Installation Hubs Hubs Hubs may be installed between the switch and the library, but are NOT supported between servers and switches or between two switches (i.e., switch spanning). (See Figures 2-1 through 2-4 on pages 2-9, 2-10, 2-11, and 2-12.) To prevent damage to the fiber-optic cable, DO NOT have a bend radius of less than three inches. Keep all sharp objects away from the cable and place the cable where it will not be crushed by nearby equipment. FC hubs may not be used in place of switches for providing shared access to tapes and tape libraries. Loop topologies allow for one host to interrupt the backup taking place from another host to a tape device. FC switches isolate host interactions from each other, providing a more robust environment for streaming data. Hubs may be used with switches to aggregate tape drive connections into a switch. However, they may not be used between hosts and switches. Also, multiple hubs may not be cascaded when used to aggregate tape drive connections to a switch port. When aggregating tape drives, no more than 10 DLT 8000 drives would be configured per hub. This assures there is not a performance bottleneck between the tape drives and switch. 2-8 Chapter 2