HP Surestore Tape Library Model 6/140 SAN Solution Installation Guide - Page 42
Setting the Date, Setting the Time
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installation Tape Libraries Setting the Date The library saves the current data and time in non-volatile memory. You can set the date from the library configuration screen. To set this value: 1. At the Library Configuration menu, press an arrow button until the cursor underscores DATE. 2. Press the [SELECT] button. An editing screen appears. 3. On the editing screen: - Use the arrow keys to select a value for each portion (field) of the date. - Use the [SELECT] button to move right to the next field. - Use the [MENU] button to move left to the previous field. 4. When the screen displays your desired setting, press the [SELECT] button from the right-most field to save the changes. To abort, press the [MENU] button from the left-most field. 5. If you have already changed the library's SCSI ID and are planning to exit the Main Configuration menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section, "Setting the Time." Setting the Time You can set the time from the library configuration screen. To set this value: 1. At the Library Configuration menu, press the arrow button until the cursor underscores TIME. 2. Press the [SELECT] button. An editing screen appears. 3. On the editing screen: - Use the arrow keys to select a value for each portion (field) of the time. - Use the [SELECT] button to move right to the next field. - Use the [MENU] button to move left to the previous field. 2-24 Chapter 2