HP Surestore Tape Library Model 6/140 SAN Solution Installation Guide - Page 45
Placing the Library Online, Sending Library Audit Data to Client
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Installation Tape Libraries 9. When your choice is highlighted, press the [SELECT] button to save the changes. To abort, press the [MENU] button. The Drive Configuration screen will reappear. 10. Continue with these steps until all drives are configured. 11. If you have already changed the library's SCSI ID and are planning to exit the Main Configuration menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section, "Placing the Library Online." Placing the Library Online Before you place the library into operation, you must first: 1. Enter the system command to place all drives online. 2. When all drives are online, enter the command to place the library online. 3. Enter the command to upload the library audit data to the client system memory. Sending Library Audit Data to Client During an IPL, the library audits the location and VOLSER of all cartridges in the storage and reserve cells. The library also performs an audit when you: • Power-on the tape library. • Open and close the front library door. • Reset the tape library. • Make a request at the customer server console to audit the tape library. After the library is configured, you must follow every audit with a client command that loads the library audit data into client memory. For instructions on how to send this command, refer to your software and system publications. Chapter 2 2-27