HP TC1000 Maintenance and Service Guide, Compaq Tablet PC TC1000 - Page 111
Digitizer Cable
UPC - 613326724071
View all HP TC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Removal and Replacement Procedures 5.7 Digitizer Cable ✎ The digitizer cable is included in the Miscellaneous Cable Kit, spare part number 310673-001. Perform the following steps to remove the digitizer cable: 1. Prepare the tablet PC for disassembly (Section 5.3). 2. Remove the display panel assembly (Section 5.5). 3. Disconnect the digitizer cable 1 from the system board (Figure 5-19). 4. Remove the digitizer cable from the clips in the heat sink 2. 5. Remove the digitizer cable from the base enclosure 3. Figure 5-19. Removing the Digitizer Cable Reverse the preceding procedures to install the digitizer cable. Maintenance and Service Guide 5-23
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
5.7 Digitizer Cable
✎
The digitizer cable is included in the Miscellaneous Cable Kit,
spare part number 310673-001.
Perform the following steps to remove the digitizer cable:
1. Prepare the tablet PC for disassembly (Section 5.3).
2. Remove the display panel assembly (Section 5.5).
3. Disconnect the digitizer cable
1
from the system board
(Figure 5-19).
4. Remove the digitizer cable from the clips in the heat sink
2
.
5. Remove the digitizer cable from the base enclosure
3
.
Figure 5-19. Removing the Digitizer Cable
Reverse the preceding procedures to install the digitizer cable.