HP TC1000 Maintenance and Service Guide, Compaq Tablet PC TC1000 - Page 121
Removing the Fan and Heat Sink, Lift the system board straight up
UPC - 613326724071
View all HP TC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Removal and Replacement Procedures 7. Turn the system board bottom side up with the heat sink grille facing you. 8. Remove the mylar system board shield 1 (Figure 5-27). 9. Remove the three PM2.0 × 5.0 screws 2 that secure the fan and heat sink to the system board. 10. Lift the system board straight up 3. The fan and heat sink 4 will remain resting on the work surface. Figure 5-27. Removing the Fan and Heat Sink Reverse the preceding procedures to install the EMI shield, fan, and heat sink. Maintenance and Service Guide 5-33
Removal and Replacement Procedures
Maintenance and Service Guide
5–33
7.
Turn the system board bottom side up with the heat sink grille
facing you.
8. Remove the mylar system board shield
1
(Figure 5-27).
9. Remove the three PM2.0 × 5.0 screws
2
that secure the fan
and heat sink to the system board.
10. Lift the system board straight up
3
. The fan and heat sink
4
will remain resting on the work surface.
Figure 5-27. Removing the Fan and Heat Sink
Reverse the preceding procedures to install the EMI shield, fan,
and heat sink.