HP TouchSmart tm2t-2100 HP TouchSmart tm2 Notebook PC - Maintenance and Servic - Page 58

RTC battery, from the system board.

Get HP TouchSmart tm2t-2100 PDF manuals and user guides View all HP TouchSmart tm2t-2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

RTC battery Description RTC battery (includes cable and double-sided tape) Spare part number 592965-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the memory cover (see Memory module on page 41). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Release the RTC battery (2) from the system board. (The RTC battery is attached to the system board by double-sided tape.) Reverse this procedure to install the RTC battery. 48 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided tape)
592965-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery
on page
36
).
5.
Remove the memory cover (see
Memory module
on page
41
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Release the RTC battery
(2)
from the system board. (The RTC battery is attached to the system
board by double-sided tape.)
Reverse this procedure to install the RTC battery.
48
Chapter 4
Removal and replacement procedures