HP TouchSmart tm2t-2100 HP TouchSmart tm2 Notebook PC - Maintenance and Servic - Page 63

Pen holder and eject assembly, that secure the pen holder and eject assembly

Get HP TouchSmart tm2t-2100 PDF manuals and user guides View all HP TouchSmart tm2t-2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Pen holder and eject assembly Description Pen holder and eject assembly Spare part number 592972-001 Before removing the pen holder and eject assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 38). b. Memory cover (see Memory module on page 41). c. Top cover (see Top cover on page 49). Remove the pen holder and eject assembly: 1. Remove the three Phillips PM2.0×4.0 screws (1) that secure the pen holder and eject assembly to the base enclosure. 2. Remove the pen holder (2) and eject assembly (3) from the base enclosure. Reverse this procedure to install the pen holder and eject assembly. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
Pen holder and eject assembly
Description
Spare part number
Pen holder and eject assembly
592972-001
Before removing the pen holder and eject assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery
on page
36
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
38
).
b.
Memory cover (see
Memory module
on page
41
).
c.
Top cover (see
Top cover
on page
49
).
Remove the pen holder and eject assembly:
1.
Remove the three Phillips PM2.0×4.0 screws
(1)
that secure the pen holder and eject assembly to
the base enclosure.
2.
Remove the pen holder
(2)
and eject assembly
(3)
from the base enclosure.
Reverse this procedure to install the pen holder and eject assembly.
Component replacement procedures
53