HP Vectra VEi8 HP Vectra VEi8, Service Handbook - Page 10
Replacing the Cover
 |
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Removing and Replacing the Cover and Front Panel Replacing the Cover Before replacing the cover, ensure that all internal cables are properly connected and safely routed. 1 If necessary, replace the front panel. To do this, insert the three plastic tabs into the holes in the front of the PC chassis and snap the panel in place. 2 Lower the cover and slide it into position. 3 Tighten the three thumbscrews at the rear of the PC. 4 If required, lock the cover with the key at the rear of the PC.
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
 |
 |
Removing and Replacing the Cover and Front Panel
Replacing the Cover
Before replacing the cover, ensure that all internal cables are properly
connected and safely routed.
1
If necessary, replace the front panel. To do this, insert the three
plastic tabs into the holes in the front of the PC chassis and snap the
panel in place.
2
Lower the cover and slide it into position.
3
Tighten the three thumbscrews at the rear of the PC.
4
If required, lock the cover with the key at the rear of the PC.