HP Vectra VEi8 HP Vectra VEi8, Service Handbook - Page 20

Replacing the Celeron Processor (VEi7 models) 4 Position the new processor over the socket, with its corner marker facing the corner marker on the socket. Design 1 Design 2 5 Install the new processor and lower the lever to lock it in place. 6 Apply more heat interface if required. Replace the heatsink and fasten the clip. The retention clip will be of one of the designs shown above. NOTE The heat interface that bonds the heatsink to the processor can be damaged when you change processors. You can order more heat interface by consulting the Service Handbook, downloadable from the "Manuals" section of www.hp.com/go/vectrasupport. 7 Replace the cover (described in this chapter). NOTE If you replace your processor or system board, you may need to update your BIOS. The latest BIOS for your PC and instructions on updating the BIOS are available from: www.hp.com/go/vectrasupport.