HP Vectra VEi8 HP Vectra VEi8, Service Handbook - Page 12
Replacing an Accessory Board
 |
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Replacing an Accessory Board Replacing an Accessory Board 1 Remove the computer's cover (described in this chapter). 2 Remove the screw that holds the old board in place. 3 Hold the old board firmly and carefully pull it out. 4 Aligning the new board carefully, slide it into position, then press it firmly into the slot and tighten the retaining screw. 5 Replace the cover (described in this chapter).
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
 |
 |
Replacing an Accessory Board
Replacing an Accessory Board
1
Remove the computer’s cover (described in this chapter).
2
Remove the screw that holds the old board in place.
3
Hold the old board firmly and carefully pull it out.
4
Aligning the new board carefully, slide it into position, then press it
firmly into the slot and tighten the retaining screw.
5
Replace the cover (described in this chapter).